Mobile concrete plant Maprein Barcelona 50 (35-50 m3/h) Spain
Mobile concrete plant Maprein Barcelona 50 (35-50 m3/h) Spain
The representative of the manufacturer - the Spanish company "Maprien С.L.", offers high-quality equipment for production - Concrete plants, Automatic lines for the production of dry building mixtures, at minimum prices and convenient delivery terms.
Thank you for your interest in the products of the Spanish manufacturer - Maprein!
Maprein has been producing equipment for the production of concrete and building mixtures for over 35 years.
Concrete plants and other equipment operate in many countries of the world on all continents.
Hundreds of units of supplied equipment confirm the high quality and reliability of the manufacturer.
The company has 2 production facilities that produce modern high-quality equipment.
Mobile concrete plant of container type. Located on a container frame. Overall dimensions are similar to a 40 foot sea container, which allows it to be easily transported by any auto trailer. Does not require a special foundation! Installation and start-up in a new place in 3-4 hours!
Commercial offer for a mobile concrete plant Maprein Barcelona 50 (35-50 m3/hour) Spain.
Specifications:
Group of bunkers of inert materials 4*6.3 m3
Square arrangement (2 x 2)
Total volume 25 m³
Dimensions 6.000 mm x 4.000 mm.
Dosing of aggregates into the weighing hopper through pneumatic dampers.
Pneumatic gates 300 x 600 mm for sand and 300 x 400 mm for gravel.
Opening and closing with pneumatic cylinders.
Made from sheet metal 3 and 4 mm.
Legs from HEB. Upper frame in IPE.
Reinforcement with a rolled profile.
electric vibrator
Electric motor vibrator 500/3.
Automatic weight batcher of inert materials.
Productivity 1 m³ / production cycle
Made from sheet metal 4 mm thick.
Equipped with 5 load cells
Attached to the conveyor belt with a threaded rod, adjustable in height.
Internal tile to regulate flow volume.
electric vibrator
Extraction and lifting belt conveyor.
Distance between axles 11.000 mm
Ribbed band width 650mm
Motor reducer 9.2 kW.
Vulcanized drive roller Ø 325 mm. Axle Ø 60 mm.
Tension roller Ø 325 mm. Axle Ø 60 mm.
Frame made of UPN 140. Reinforcement with rolled profiles.
Cleaning the drive and idler rollers
Top rollers Ø 89 mm. Sealed bearings
Distance between roller stations 330 and 780 mm.
Bottom rollers Ø 89 mm. Sealed bearings.
The distance between the lower rollers is 3000 mm.
Emergency stop with steel cable on both sides of the extractor belt.
Automatic cement dispenser.
Capacity 550 kg.
Made from 3mm thick metal sheet.
Equipped with three weight sensors.
Pneumatic throttle.
Pneumatic vibrator.
Frames of cement weighing equipment.
Reinforcement with a rolled profile.
Meter and water pump.
Pulse counter from 1 to 10 liters in 2" increments.
Pneumatic opening / closing.
Water pump 4 kW.
Filter
mixer platform.
Dumping height 4000 mm.
Corrugated sheet metal floor
Legs from HEB. Reinforcement with a rolled profile.
Safety access ladder from floor level
Protective fences.
Mixer TURBO , Option - 2-shaft or planetary
Model PAN 1500 / 1000
Ready Concrete 1000 liters / cycle
Electric motor 37 kW.
Wear pads made of HARDOX 400
Cast mixing blades 630 HB
Water distribution system
Opening of the unloading gate by the oleodynamic pump. In case of an accident
provided with a hand pump.
EU mechanical and electrical safety standards.
unloading cone.
Made from 5mm thick sheet metal.
Pneumatic installation.
Waterproof cabinet for electrovalves.
Electrovalves for the operation of actuators.
Installation of Tecalon 8 x 10 fittings and pipes.
Compressor air tank 500 liters, power 5.5 kW.
General distributor at the outlet of the compressor. Lubrication kit.
Panel of computer control and management of the plant.
Manual and automatic control.
Operating panel with animated schematic diagram.
Contained in a cabinet, protection class IP65.
Main switch protection.
Power protection switches for all motors.
EU safety standards.
Pre-installation of electrical equipment.
Installation of electrical appliances.
Connection of the panel with electrical appliances.
Automatic control system
Management and control is carried out using PLC Siemens and PCI.
HMI interface (SCADA).
Automatic weighing, dosing and control system
Real time control. Accounting for operations and incidents and reporting.
System inputs and outputs via relay cards.
UPS protection system
Printer, LCD screen, keyboard and mouse.
Installation supervision, assembly and commissioning.
Warranty 24 months
The manufacturer conducts installation supervision and staff training.
